stl-file for Foot Plate - BERNINA Type 286 & 290 Foot Controller

Files:
FootPlate_BERNINA_Type_286-290_Foot_Pedal.stl
Clamp_BERNINA_Type_286-290_Foot_Pedal.stl
3D-Print Info.pdf

Additional parts needed:
4x inserts (from original foot pedal)
4x screws (from original foot pedal)

Slicing
No pre-sliced print files attached since the result depends on the printer and type of filament.

Recommended Print Settings
Supports: Foot Plate: None, Clamps: Support on build plate only
Infill: 15%
Filament: PETG
Nozzle diameter: 0.4 mm
Layer height: 0.2 mm

Amount of filament used, based on this settings:
Foot Plate: 120 Gram PETG
2x Clamps: 4 Grams PETG

Note!
The size of the printout from the individual 3D Printers may vary slightly. Therefore, the printout may need some finishing work.

Standard Digital File Licence
Digital files (*.fbx *.obj *.stl *.gcode and other files) sold on 3dsewingparts.com have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - remixes of this object).

You can not host this files on other digital platforms, web stores, cloud repositories WITHOUT OUR PERMITION.

Franchising:
In case you have bought 3D printing files under Standard Digital File Licence and you want to 3D print physical products commercially, you can contact us at: post@syakademiet.no

Questions about the Terms & Conditions should be sent to us at: post@syakademiet.no